British Made Door Hardware

Dortrend has been making British made door hardware in Worcester since 1972. Today we're one of very few door hardware manufacturers still operating as a genuinely British manufacturer, with over 85% of our products made in our own factory. We make tens of thousands of handles and fittings every year, from everyday lever handles to specialist anti-ligature hardware.

Plenty of brands describe themselves as British. Far fewer actually make their products here. This page explains what British made means at Dortrend, and why it matters for your project.

Made in Worcester, near the UK's industrial heartland

Our factory sits on the Blackpole West Trading Estate in Worcester, not far from the Midlands, where Britain's metalworking and manufacturing skills run deep. Under one roof we design, machine, fabricate, polish and finish our door hardware. That means the people who design a handle work alongside the people who make it, and problems get solved on the factory floor rather than by email with an overseas supplier.

What happens inside our factory

Design and development

New products and bespoke designs start in SolidWorks CAD. We use 3D printers to create prototypes, so shapes can be tested and refined before production.

Machining

Our machine shop runs several Haas CNC lathes and mills alongside manual millers, lathes, capstans and grinding equipment. This is where solid metal bar is turned into levers, roses, knobs and pull handles.

Fabrication, laser and welding

A CNC fibre laser cutter, laser welder, presses, guillotines and folders let us make plates, brackets and more complex assemblies in-house. A fibre laser marker handles engraving and identification.

Polishing and finishing

Our polishing department uses twin spindle polishing lathes and specialist polishers, and finishes are completed by hand. We also have a cold patination tank for antique and bronze finishes, and our own plant for applying TouchClean® anti-microbial coating.

Why British made door hardware is worth it

  • Quality you can check: every stage is controlled by our own team and quality management system.
  • Shorter, more reliable supply: no long shipping times or customs delays, and repeat orders match the originals.
  • Flexibility: small changes to size, finish or design are much easier when the factory is ours.
  • Expert support: you can speak to people who know exactly how each product is made.
  • Spares and matching: we can make replacements and extensions to past projects years later.
  • Lower carbon: making products close to where they're used avoids long-distance freight.

A sustainable approach

Sustainability is built into how we design and make our products. We use responsibly sourced, recyclable metals that can be recovered at the end of a product's life. Designs focus on longevity and timeless looks, so handles don't need replacing every few years. In the factory we work to reduce waste and energy use, recycle manufacturing by-products where possible and keep packaging minimal and recyclable. Our raw aluminium finish is a good example: it's simply polished and left to age naturally, using very little energy.

British made, specified worldwide

Our handles have been used on many prestigious projects in the UK and abroad, including hospitals and mental health units, and we export to Europe, the Middle East and further afield. British manufacturing has a strong reputation overseas, and our in-house development gives us a lead in specialist markets such as anti-ligature hardware.

Our British made ranges

  • Architectural door handles for commercial, healthcare and education projects
  • Anti-ligature hardware for mental health and secure environments
  • Designer door handles in the hand-finished Charles Dean range
  • Bespoke door handles and ironmongery made to your design

Explore the full range, or read more about Dortrend.

Certified and recognised

We're members of Made in Britain, the official collective mark for British-made products, and affiliate members of the GAI (Guild of Architectural Ironmongers). Our products are designed to meet current standards and regulations, and quality is the responsibility of every member of our team.

Over 50 years of manufacturing

Dortrend was founded in 1972, and in that time we've seen a lot of UK manufacturing move overseas. We chose a different path. Rather than shrinking our factory, we've kept investing in it, adding CNC machines, a fibre laser, 3D printing and our own anti-microbial coating plant. We recently added a new automatic saw to increase our capacity further. Our development work in specialist hardware, particularly anti-ligature and anti-bacterial handles, grew directly out of having design and manufacturing in the same building.

Quality you can rely on

We're committed to delivering high-quality door hardware that meets customer requirements and exceeds expectations. Our approach is built on customer satisfaction, product safety and continuous improvement. Every product is made in line with applicable industry standards, regulations and good manufacturing practice, and our quality management system is reviewed regularly. Quality isn't a separate department at Dortrend. It's the responsibility of everyone, from the machinists and polishers to the people who pack your order.

Supporting British jobs and skills

Choosing British made door hardware also supports skilled manufacturing jobs in the UK. Our team includes machinists, polishers, fabricators and designers with years of experience, and we're committed to passing those skills on. Every order helps keep that knowledge in Britain, in a part of the country with a long history of metalworking. For many public sector clients, social value and local supply chains are now part of how projects are assessed, and British manufacturing can make a real difference to those scores.

Working with our trade partners

We're a trade-only manufacturer and supply our British made door hardware through architectural ironmongers across the UK and overseas. Ironmongers value the reliability of a UK supply chain, the ability to speak directly to the factory, and the confidence that what they specify will arrive as expected. If you're an ironmonger and would like to stock our products, you can apply to become a client on our website. It's a partnership we value, and it's how the vast majority of our hardware reaches the buildings it's made for. Ironmongers also get direct access to our technical team, samples and finish swatches, which makes specifying Dortrend straightforward. We'd also be glad to show specifiers around the factory, so you can see for yourself how your hardware is made.

British made door hardware FAQs

Is all Dortrend hardware made in Britain?

Over 85% of our products are made in our own factory in Worcester. Where a component isn't made in-house, we'll tell you.

Where is your factory?

We're at the Blackpole West Trading Estate in Worcester, Worcestershire.

How long have you been manufacturing?

Dortrend was founded in 1972, so we've been making door hardware for over 50 years.

Is British made door hardware more expensive?

It can cost more than mass-imported products, but you get better quality control, reliable supply and hardware built to last, which often works out cheaper over the life of a building.

Can I visit the factory?

Get in touch to discuss a visit. Specifiers and partners are often keen to see how their hardware is made.

Do you export?

Yes. We supply projects across Europe, the Middle East and further afield.

Specify British made

Looking for door hardware that's genuinely made in Britain? Contact our team or speak to your architectural ironmonger about specifying Dortrend.